Hydranautics RO Membrane

Hydranautics RO membrane is known for its performance and productivity and for continuously meeting the increasing demands of the water treatment industry. It has an excellent salt rejection  and savings.  These membranes set high performance standards for the reverse osmosis membrane elements which deliver the highest salt rejection rates available.

Hydranautics RO membrane lower fouling in waste and surface water while having a high fouling potential for reuse and reclaimed applications. These membranes offer superior membrane technology to lower membrane fouling and treatments to treat difficult feed and municipal wastewater. To this point, these applications have significantly required a pretreatment before exposing them to a composite polyamide membrane.

The Hydranautics RO Membrane can range in size from 4” to 8” elements, delivering the highest levels of salt rejection and an always pure end product. They are designed to accommodate varying levels of seawater salinity worldwide with dependable field-proven performance. The Hydranautics RO membrane is manufactured with a thicker brine spacer which reduces the Delta P, meeting the increased demand for reduced fouling membranes. Which maintains a higher permeate flow and permits a lesser need for frequent cleaning.

Hydranautics RO Membrane Features

• High Rejection
• Sea Water Membranes
• LFC Membranes for Low Fouling
• SanRO Membranes for Sanitary or Full Fit

Hydranautics RO Membrane Elements

ESPA:  Low Energy/High Flow Tap & Brackish Water Thin Film Membranes
Energy required to pressurize Reverse Osmosis feed water is the largest contributor to the total energy consumption of the Reverse Osmosis System. As a result, chlorine tolerant membranes have helped the membrane technology become affordable and cost effective by reducing energy consumption required to operate Reverse Osmosis water treatment system. ESPA membranes are the choice for applications demanding high-energy efficiency, with un-compromised productivity and salt rejection.

Product Name	Size	Download
ESPA4-4040	4″ diameter & 40″ length
ESPA4-LD-4040	4″ diameter & 40″ length
ESPA4 LD	8″ diameter & 40″ length
ESPA4 MAX	8″ diameter & 40″ length

CPA (Composite Polyamide):  High Rejection Tap & Brackish Water Thin Film Membranes
Ultrapure water is essential in several industrial applications. CPA RO membrane is regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry. CPA lines of spiral-wound Reverse Osmosis membrane is available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates.

Product Name	Size	Download
CPA7-LD	8″ diameter & 40″ length

SWC (Seawater Composite):  Seawater Membranes
As the world is facing freshwater scarcity, Hydranautics brings a range of SWC RO membranes to meet the demands of desalination industry. SWC membranes have improved the productivity and salt rejection for more than two decades while reducing their environmental impact. SWC membranes come in a range of innovative formulations depending on the level of seawater salinity required.

Product Name	Size	Download
SWC4-LD	8″ diameter & 40″ length
SWC4 MAX	8″ diameter & 40″ length
SWC4-1640	16″ diameter & 40″ length

LFC:  Low Fouling Membranes
LFC3-LD from the LD Technology™ innovative low fouling membranes combines the attributes of a neutrally charged surface with hydrophilicity to achieve the lowest organic and colloidal fouling in the most demanding feed water conditions. Combining the attributes of a neutral surface charge and hydrophilicity, LFC3-LD provides significant reduction in fouling rates increasing the membrane’s efficiency by restoring nominal performance after cleaning.

Product Name	Size	Download
LFC3-LD-4040	4″ diameter & 40″ length
LFC3-LD	8″ diameter & 40″ length